+ 1

What is the best language to start arduino projects??

2nd Sep 2018, 7:33 AM
Benyamin Farzaneh
Benyamin Farzaneh - avatar
5 Réponses
+ 1
In the Arduino IDE you use a C/C++ dialect, so choosing C++ should work well. (my Opinion)
2nd Sep 2018, 7:58 AM
XiLef
+ 1
I agree with XiLef , c++ is a nice choice because programms look very much like c/cpp. Also if you would ever try to program some other microcontrollers like STM it uses c++ also
2nd Sep 2018, 8:33 AM
Paul
0
thank 4 ur reply guys
2nd Sep 2018, 9:19 AM
Benyamin Farzaneh
Benyamin Farzaneh - avatar
0
For start arduino you need "arduino C" - easy language dedicated for Arduino. For easy project / begginer project / You only need a few elements: 1) variable declaration: int byte long others are not oft used in simple projects 2) setup: void setup() { Serial.begin(9600); pinMode(LED,OUTPUT); } Serial.beginn - sets bits per second for serial data transmission pinMode(... , ...) - sets the pins as the input/output 3) pin sets pinMode(... , OUTPUT) - for output pinMode(... , INPUT) - for input pinMode(... ,INPUT_PULLUP) - for input default set high 4) main loop example: void loop() { digitalWrite(LED,HIGH); delay(1000); digitalWrite(LED,LOW); delay(1000); } 5) voltage setting (digital) digitalWrite(.....,HIGH) - high - 3,3V digitalWrite(.....,LOW) - low - 0V 6) time delay (in milisekonds) delay(.....) 7) reading from pin digitalRead(.....) - digital pin analogRead(.....) - analog pin 8) operators + , - , / , * , == , = 9) writing a line of text Serial.println(.....) 10) if , else 11) switch , case 12) for loop 13) change to integer Serial.parseInt() 14) waiting for sign Serial.available() these elements are enough for you to build a lot of simple projects based on popular sensors, of course, "arduino C" has many other elements.
2nd Sep 2018, 9:41 AM
Dawid
Dawid - avatar
0
⚘⚘⚘
2nd Sep 2018, 10:09 AM
Benyamin Farzaneh
Benyamin Farzaneh - avatar