2 LED's one pot Arduino

Question

Trying to control 2 LED's with one pot, I want one led to turn on only in one certain point of the pot and the other to remain on while in all other positions. So far the best I can come up with is something like this but im not sure how to modify for just two LED's and the specifics above. Am I on the right track or can someone help me please.

byte ledPin[] = {2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13}; //pins used for LED's
int potPin = 0;  // analog pin used to connect the potentiometer
int val;    // variable to read the value from the analog pin

void setup()
{
  for(int i = 0; i < 13; i++){   
      pinMode(ledPin[i],OUTPUT);
  } 

}

void loop()
{
val = analogRead(potPin);            // reads the value of the potentiometer (value between 0 and 1023)
  for (int i = 0; i < 13; i++) {
    if( (i * 102) > val) { digitalWrite(ledPin[i], HIGH);}
    else
     { digitalWrite(ledPin[i], LOW);}
  }
}

Answer 1

I don't understand very well your post(because the question and code are kinda unrelated to each other). But if you want a led to turn on only in a certain point and the other to be off, but in any other point the first led to be off and the other to be on, no matter the point:

if( val == certain_point){
digitalWrite(led_1, HIGH);
digitalWrite(led_2, LOW);
}
else{
digitalWrite(led_1, LOW);
digitalWrite(led_2, HIGH);
}

I don't know if this helps. Feel free to ask me anything about this.

Answer 2

I think better use switch statement. In this case you can precisely select your range for led

Answer 3

Thank you molang that is what I needed. And thank you id001x any info always helps. Thank you everyone.